Filter
Top Products
the right channel input and the white represents the left channel input. The output level for any device
connected to these input jacks will be controlled by FADER CHANNEL 1.
22. CHANNEL 1: LINE 1 RCA INPUT JACKS - These Jacks are used for line level inputs. Connect CD
players such as the American Audio® CDS-1™ or tape decks to LINE inputs. Line level musical instru-
ments with stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE
inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA jack represents
the right channel input and the white represents the left channel input. The output level for any device
connected to these input jacks will be controlled by FADER CHANNEL 1.
23. GND (GROUND TERMINAL) - This connection is used to ground the excess magnetic ux of
phono turntables. Connect your turntable ground lead to the ground terminal. This will reduce the
humming and popping noises associated with magnetic phono cartridges.
24. CHANNEL 2: PHONO 2 JACKS - Connect turntables equipped with MM pickup cartridge to
PHONO inputs (All DJ turntable use MM pick-up cartridges). The red colored RCA jack represents
the right channel input and the white represents the left channel input. The output level for any device
connected to these input jacks will be controlled by FADER CHANNEL 2.
25. CHANNEL 2: LINE 2 RCA INPUT JACKS - These Jacks are used for line level inputs. Connect CD
players such as the American Audio® CDI-100 Mp3 or tape decks to LINE inputs. Line level musical
instruments with stereo outputs such as Rhythm Machines or Samplers should also be connected to
LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA jack repre-
sents the right channel input and the white represents the left channel input. The output level for any
device connected to these input jacks will be controlled by FADER CHANNEL 2.
26. REC OUT - This is a low current unbalanced output source designed for various tape and CD
recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (8), it is not
inuenced by the MASTER VOLUME CONTROL (2).
27. RCA MASTER OUTPUTS - The Master Output includes a pair of RCA Unbalanced Jacks to form
a stereo output. The left channel is clearly marker with “L” and is color coded white, the right channel
output is marked “R” and is color coded red. The RCA jacks send a low current unbalanced output
signal to your amplier or tuner. When connecting to a tuner be sure to use the “AUX” inputs.
28. AC VOLTAGE INPUT - This connector is used to supply main power to the unit via the included
detachable power supply. Only use the supplied power adaptor to avoid damaging the unit. The unit
receives an input power supply of AC 9v/1000mA.
29. MAIN POWER SWITCH - This is the main power ON/OFF button. Before main power is applied,
be sure you have made all connections to the mixer. Also be sure your amplier(s) is tuned off. Remem-
ber to avoid damaging pops, mixer on rst and turned off last.
Q-D1 PRO CONTROLS AND FEATURES CONT.
©American Audio® - www.AmericanAudio.us - Q-D1 PRO Instruction Manual Page 12