Filter
Top Products
Q-D1 PRO CONTROLS AND FEATURES
1. CUE LEVEL VOLUME CONTROL - This knob adjusts the headphone volume output level. Turning
the knob in clockwise direction will increase headphone volume output.
2. MASTER VOLUME CONTROL - This rotary knob is used to control the master output level (volume).
To avoid distorted output try to maintain an average output signal level +4 dB. Be sure this volume
control is always set to zero before turning the unit on.
3. MIC LEVEL - This rotary knob is used to control the microphone volume output level. Turning the
knob in a clockwise direction will increase volume output.
4. CHANNEL GAIN CONTROL - This adjustment is used to adjust the audio source signal input gain
for a channel. Never use the gain control to adjust a channels output volume. Setting the gain level
properly will ensure a clean output signal. An improper gain level adjustment will send a distorted
signal throughout the entire audio line which may damage speakers and amplifiers. To properly set a
channels the gain level control:
1. Be sure the MASTER VOLUME CONTROL (2) is set to level 8.
Front Panel
©American Audio® - www.AmericanAudio.us - Q-D1 PRO Instruction Manual Page 8
9
8
7
6
5
4
1 32
15
16
14
17
13 12 11 10