Filter
Top Products
Model: Q-D6, Professional 3 Channel Preamp Mixer
POWER SUPPLY: AC9V, 1000mA
DIMENSIONS: 10”W x 12.25”D x 3.25”H /254 x 308 x 82.5 mm
WEIGHT: 7 Lbs. / 3.2 Kg
CROSSFADER: Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
POWER CONSUMPTION: 5W typical, 7W w/ full headphone output
HEADPHONE IMPEDANCE: 32 Ohms
ENVIRONMENTAL CONDITION: Operating Temperature: 5 to 35 deg. C; Humidity: 25 to 85%
RH (non-condensing); Storage Temperature: -20 to 60 ˚C
Input Sensitivity (Level/Impedence): LOAD=100K OHM
LINE, AUX: -14dB (200mV)/10K Ohms ±2dB
PHONO: -50dB (3.16mV)/47K Ohms ±2dB
MICROPHONE: -60dB (1mV) /2.2K Ohms ±2dB
Output Sensitivity (Level/Impedence): Note: 0dBV=1Vrms,
LOAD=100K OHM
MASTER OUT (XLR): 600 Ohms / +4dB (1.23V) +/-2dB
MASTER OUT (RCA): 1K Ohms
REC OUT (RCA): -10dB (316mV)/2.2K Ohms ±2dB
PHONES (LOAD=32 OHMS): 0dB (1V)/33 Oms ±2dB (Cue Mixing at Center)
Maximum Output (Load = 100K, THD = 1%)
MASTER (RCA): MORE THAN 18dB (8V)
PHONES (Load=32 ohms): MORE THAN 4dB (1.6V)
CHANNEL BALANCE: Within 3dB
Frequency Response:
LINE, AUX: 20Hz - 20KHz, +/-2dB
PHONO: 20Hz - 20KHz, +2/-3dB (RIAA)
MICROPHONE: 20Hz - 20KHz, +1.5/-3dB
Output Noise (MAX. GAIN, EQ FLAT, W/ 20KHz LPF, A-WEIGHTED):
LINE/AUX: MORE THAN 90dB
PHONO: MORE THAN 72dB
MIC: MORE THAN 62dB
THD - Total Harmonic Distortion (20Khz, 0dB Output):
LINE: Less than 0.015% 20-20KHz
CROSS TALK:
LINE, AUX: MORE THAN 65dB AT 1KHz between L and R
MORE THAN 70dB AT 1KHz between Channels
Channel Equalizer:
BASS: 9 +/-2dB at 70Hz / -25 +/-3dB at 70Hz
MID: 9 +/-2dB at 1KHz / -27 +/-4dB at 1KHz
TREBLE: 9 +/-2dB at 13KHz / -15 +/-3dB at 13KHz
Microphone Equalizer:
BASS:
10 +/-2dB at 1000Hz / -10 +/-2dB at 100Hz
TREBLE: 10 +/-2dB at 10KHz / -10 +/-2dB at 10KHz
Q-D6™ Specifications
©American Audio® - www.americanaudio.us - Q-D6™ Instruction Manual Page 16