Filter
Top Products
5. STOPPING PLAYBACK - Figures 4 & 5
Stopping playback will not stop the reading mecha-
nism, but merely pause the track, this function al-
lows the unit to begin play instantly. The reading
mechanism will only stop if a USB device is re-
moved. Press the PLAY/PAUSE BUTTON (48) dur-
ing playback. This will pause playback at the exact
same point the PLAY/PAUSE BUTTON (48) was
pressed.
3. STARTING PLAYBACK - Figure 4
When a USB device is connected pressing the PLAY/
PAUSE BUTTON (48) to start playback. The PLAY/
PAUSE BUTTON LED will glow as soon as playback
begins.
Q RECORD USB PLAYER BASIC OPERATIONS (CONT.)
Figure 4
Figure 5
4. PAUSING - Figure 4
This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (48) was pressed. Pressing
the PLAY/PAUSE BUTTON (48) will switch between play and pause modes. When the unit is in pause mode
the PLAY/PAUSE BUTTON LED will begin to flash repeatedly.
©American Audio® - www.americanaudio.us - Q Record Instruction Manual Page 17
RECORDING TO YOUR USB DEVICE:
1. Select the channel to record from and turn the RECORD SELECT KNOB (45) to that channel.
Insert your USB device into the USB port (49).
2. Press the RECORD START/ STOP button (46) on the Q Record, when the button LED begins to
blink start playing the track(s) you wish to record. Your are now recording to your USB device.
3. After you finished recording your desired material, press the RECORD START/STOP button (46)
to stop recording to your USB device.