Every WM UHF16™ has been thoroughly tested
and has been shipped in perfect operating con-
dition. Carefully check the shipping carton for
damage that may have occurred during ship-
ping. If the carton appears to be damaged,
carefully inspect your wireless microphone for
any damage and be sure all equipment neces-
sary to operate the wireless microphone has
arrived intact. In the event damage has been
found or parts are missing, please contact our
toll free customer support number for further
instructions. Please do not return the wireless
microphone to your dealer without first contact-
ing customer support.
©American Audio® - www.americanaudio.com - WM UHF16™ Instruction Manual Page 3
WARRANTY INFORMATION
The WM UHF16™ carries a ONE year (365
days) limited warranty. This warranty covers
parts and labor. Please fill out the enclosed
warranty card to validate your purchase and
warranty. All returned service items whether
under warranty or not, must be freight pre-
paid and accompany a return authorization
(R.A.) number. If the unit is under warranty,
you must provide a copy of your proof of pur
-
chase invoice. Please contact American Audio
®
customer support at (800)
322-6337 for a R.A.
number.
WM UHF16™ PRODUCT INFORMATION
The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer
-
ence.
Model No._____________________________
Serial No._____________________________
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_____________________________________
_____________________________________
Dealer Phone__________________________
I. Heat - The receiver should be situated away
from heat sources such as radiators, heat reg
-
isters, stoves, or other appliances (including
amplifiers) that produce heat.
2. Do not let insecticides, benzene, or thinner
come in contact with the surface of the unit.
3. Never disassemble or modify your unit in
any way, doing so will void your manufactures
warranty.
4. Never plug this unit in to a dimmer pack
5. Do
not attempt to operate this unit if it
becomes damaged in any way.
6. This unit is intended for indoor use only, use
of this product outdoors voids all warranties.
7. Always mount this unit in safe and stable
matter.
8.
Disconnect from main power before making
any type of connection.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
WATER OR MOISTURE
NOTE: This product satisfies FCC regulations
when shielded cables and connectors are
used to connect the unit to other equipment.
To prevent electromagnetic interference with
electrical appliances such as radios and tele
-
visions, use shielded cables and connectors
for connections.