Filter
Top Products
TP-DMX24F™ Instructions page 8
OPERATING INSTRUCTIONS Cont.
MIDI SETTING AND RUNNING
MIDI SETTING
Touch and hold (FIG.1.) CHASE 9, CHASE 10, CHASE 11,CHASE 12, while power is being turned
on.
CHASE 1, CHASE 2, CHASE 3 LEDs blink rapidly and (FIG14.) LCD DIGITAL DISPLAY READS
AAAAAA
this means console is in MIDI mode.
1. CHASE 1 MIDI SEND / CHASE 2 MIDI RECEIVE
Touch CHASE 1 or CHASE 2 the LEDs blinks and go out. MIDI channel is defined, as CHANNEL
1-16,CHANNEL 17-24 is not assigned. Touch any CHANNEL 1-16, LED lights then touch (FIG 7.)
AUDIO PERCENT TRAITS CHASE, selected CHANNEL is memorized. Touch (FIG 7.) AUDIO
PERCENT TRAITS CHASE once more to exit from MIDI and to return to MANUAL mode.
2. CHASE 3 MIDI MEMORY DUMP.
Touch CHASE 3, LED lights, and other turn off. touch once more to transmit memory information,
when the LED blinks, transmission is done. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE the
LEDs of CHASE 1, CHASE 2, CHASE 3 light. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE
once more to exit from MIDI and to return to MANUAL mode.
MIDI RUNNING
1. NOTE ON / NOTE OFF
To receive note on / note off information touch (FIG 2.) CHANNEL 1-24 note on / note off informa-
tion is sent with maximum speed.
NOTE NUMBER CHANNEL
88-111 1-24
Touch KEY to send PROGRAM CHANGE infor mation or to receive PROGRAM CHANGE informa-
tion and to run.
NOTE CHNG NUMBER CHANNEL
PROGRAM CHNG NUMBER FUNCTION
0 - 23 TURN ON CHASE 1-24
24 - 47 TURN OFF CHASE 1-24
96 SINGLE CHASE
97 MIX CHANNEL