Filter
Top Products
Heritage B-15 Bass Amplifier
12
Flip-Top Instructions:
So you’ve made it this far and you are now
ready to flip your lid...or at least the amp. We
will instruct you on how to do the latter, as
we are not in the business of lid-flipping!
It is accomplished in five simple steps:
Step 1: loosen the latches on each side of
the cabinet. There are two latches on each
side, four total.
Step 2: using the handle, lift the top of the
cabinet (amplifier is attached underneath) and
rotate it 180˚.
Step 3: set the cabinet top handle-side down
on the top of the cabinet. The amplifier
should now be on the top.
Step 4: line up and lock all four latches.
Step 5: connect the amp to the cabinet.
Step 6: connect the power cable to a power
source.
Step 7: connect the instrument to the amp.
Step 8: power up the amp.
Step 9: the rest is up to you and the world is
your oyster!
Service Information
I
f you are having a problem with the Heritage B-15, please contact George Metropoulos by
emailattech@metroamp.comorbyphoneat(810)614-3905.
The Heritage B-15 is covered with sheet metal (amplifier) and a durable fabric-backed vinyl material
(cabinet), so be sure to clean with a dry lint-free cloth.
Never spray cleaning agents on the Heritage
B-15. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
©2010 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW0874 Rev. C 10/10