AmpliVox S1600 Microphone User Manual


 
The AmpliVox S1600 wireless microphone system is compact,
lightweight and compatible with all AmpliVox and Perma Power
Sound Systems currently being produced or that were produced
since 1961. The S1600 operates in an authorized VHF band and
has a useful range of up to 200’ in line-of sight applications.
Each S1600 system operates on two crystal-controlled, switch-
selectable frequencies for clear clean transmission.
“A” Channel “B” Channel
T6: 171.105 MHz T7: 171.845 MHz
The frequency appears on the back of each unit. Both transmitter
and receiver must have the same, and both units must be set to
either “A” or “B.”
Note that two transmitters on the same frequency will not work
with one receiver. However two or more receivers will work with
the same transmitter
The S1600 is offered with a choice of two microphones: The
S2030 miniature cardioid condenser lapel microphone or the
S2040 headset microphone.
Before use, make certain you understand the function and
operation of the system.
RF INTERFERENCE
Please note that wireless frequencies are shared with other radio
services. According to the Federal Communications Commission
regulations, “Wireless microphone operations are unprotected
from interference from other licensed operations in the band. If any
interference is received by any Government or non-Government
operation, the wireless microphone must cease operation…”
If you need assistance with operation of frequency selection,
please contact your dealer or AmpliVox.
Additionally There are models available for use in Canada.