Filter
Top Products
4
UNPACKING & INSPECTION
Open the shipping carton and check that all equipment necessary to operate the
system has arrived intact. In addition to this user manual, you should receive the
following items:
1. M-1 Mobile fogger
2. 12V – 2.3Ah rechargeable battery
3. Rechargeable battery charger
4. Power cable for the battery charger
5. 500 cc bottle of Antari fog liquid
6. Briefcase sized Mobile Fogger flight case
Before beginning initial setup of your Antari M-1 Mobile Fog Machine, make sure
that there is no evident damage caused by transportation.
In the event that the unit’s housing or cable is damaged, do not plug it in and do
not attempt to use it until after contacting your Antari dealer for assistance.
SETUP
Remove all packing materials from the fog machine. Check that all foam and
plastic padding is removed, especially in the nozzle area.
Fill with Antari Fog Liquid (FLM-05) or dealer recommended high-quality
water-based fog fluid. Any other types of fluid can damage the unit. When filled,
place cap back on liquid tank.
Charge the battery. Plug the adaptor into a grounded electrical outlet. The green
light on the battery charger will light up when it is connected to the power supply.
Then connect the charging head to the battery. Please note the battery required
8hr charging time on first charge. The battery will be fully charged in approximately
2~3 hrs.
The charge will last between 10-12 minutes of constant fog output before needing
to be re-charged.
Plug the charged battery into the bottom of the M-1 Mobile Fogger with the label
face up.