Filter
Top Products
8
OPTIONAL REMOTE CONTROL OPERATION
There are two optional remote controls designed for the M-1 Mobile Fogger.
1. MCT-1 Timer Remote Control: This remote control is connected via an 8-meter
cord. The duration of the fog blast is set at 10 seconds. The interval is
controlled by the dial on the remote and is adjustable between 3 and 220
seconds.
2. MCR-1 Wireless Remote Control: This remote control consists of two
components. The transmitter is on a small key chain and has a range of up to
50 meters from the receiver. The receiver connects to the side of the M-1
Mobile Fogger and can attach to the M-1’s case via a magnetic strip.
Pressing the remote control’s button once starts the M-1 fogging. A second
press stops the M-1’s fog output.
Warning: The battery must be removed and the power adaptor unplugged before
connecting or disconnecting either of the remote controls to the M-1 Mobile
Fogger.
Optional Power Adaptor
When desired the M-1 Mobile fogger can be powered by an optional power adaptor
which plugs into a standard electrical outlet.
The adaptor connects to a dummy battery which plugs into the battery slot on the M-1.
This allows for unlimited operation of the fog machine.
The disadvantage is that a power supply is required and the mobility of the M-1 is
reduced as a result.
The advantage is that the machine can fog continuously over an unlimited period of
time.
Important
Always monitor tank fluid level as you are fogging. Running a fog machine with no
fluid can permanently damage the unit.
If you experience low output, pump noise or no output at all, remove the battery
immediately. Check fluid level and re-charge the battery. When the liquid tank is
full and the battery is charged, plug the battery in and press the button on the
handle.
If the machine is still not working and you are unable to determine the cause of the
problem, do not continue pushing the remote button, as this may damage the unit.