Filter
Top Products
DMX-4 USB Mixer User Manual
31
Gain adjustment -102 to +25.5dB
THD+N -84dB (note 2)
Note 2. A weighted. Test conditions: Test signal of –
30dBV amplitude input into microphone input. Input
gain slider set to +30dB, Monitor gain slider set to 0dB.
A/D converters:
Type Cirris Logic CS5361, 24
bit
Sample Rates 8, 11.025, 12, 16,
22.05, 24, 32, 44.1,
and 48KHz
THD+N (-30dBV input) 90dB (Note 3)
THD+N (-60dBV input) 65dB (Note 3)
Note 3. A weighted. Microphone gain adjusted for –1dB below
full scale input to A/D.
Power:
Input range +5VDC to +15VDC
Power consumption 5 watts
Protection Reverse polarity and
overvoltage clamping
with self resetting
fuse
Physical:
Size 7 inches x 4.6 inches
x 1.8 inches
Weight 1 pound for unit, <
0.5 pounds for power
adapter
DMX-4 USB Mixer User Manual
32
Technical Assistance
Technical assistance with this product is available from Antex
via:
email: asupport@antex.com
Web: www.antex.com
Phone: (310) 532-3092, ext 18 or 33, 7AM to 5PM PDT
12 Month Limited Warranty
Antex Electronics Corporation (the Company), warrants to the
original purchaser of this product that should this product or
any part thereof, under normal use and conditions, be proven
defective in material or workmanship within 12 months of the
original date of purchase, such defect(s) will be repaired or
replaced with new or reconditioned product (at the Company’s
option) without charge for parts and labor.
To obtain repair or replacement within the terms of this
Warranty, the product is to be delivered with proof of warranty
coverage (i.e. dated sales receipt), specification of the
defect(s), and transportation prepaid to the Company at the
address shown below.
This Warranty does not extend to the elimination of externally
generated static or noise, to correction of antenna problems,
to costs incurred for installation, removal or reinstallation of
the product, or damage to other components.
This Warranty does not apply to any product or part thereof
which, in the opinion of the Company, has suffered or been
damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal of any
factory applied markings. THE EXTENT OF THE COMPANY’S
LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE, AND, IN NO