Atlas Sound TSD-MIX41 Music Mixer User Manual


  Open as PDF
of 8
 
Owner’s Manual
TSD-MIX41
4x1 Mic/Line Mixer
AtlasSound.com – 4 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Rear Panel Description
TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm
pitch between pins.
1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for
an external 24VDC power supply (sold separately). Because of the TSD’s low power consumption,
asingleexternalpowersupplymaypowermorethanoneTSD.Pleaserefertothespecications
on current requirements in milliamps to match with the appropriate power supply. Note: It is
acceptable to exceed the current requirements of the TSDs but NOT safe to use a power supply
that is below the current requirement of the device.
2. Balanced Inputs 1-4 - Connects to balanced line or mic level sources. Your connection must be
matedproperlytotheinputconnectororsignallossand/ornoisemayoccur.Forgainorsource
inputtypeselection,refertothe“DipSwitchFunctionIdentication”chartforproperinputsetting.
Note:Unbalancedlinelevelinputscanbeinsertedwithproperwirecongurationbyconnecting
the(G)and(-)terminalstogether.
3. Balanced Line Output-Providesoutputwhenaninputsignalispresentforconnectionto
balanced line level devices. Your output connections must be connected properly to the
connectors or loss and/or noise may be introduced into the signal. Note:Unbalancedlinelevel
devicescanbeusedwithproperwirecongurationbyconnectingthe(G)and(-)terminals
together.
4. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing
theincludedcablemanagementretainers.Removeoneoftherearpanelscrews,alignthe
panel hole with a retainer and firmly tighten the screws.
3
21
44
4 4
 previous next