Filter
Top Products
ENGLISH
EUROLIVE B312A/B315A User Manual
3
Before You Get Started1.
Shipment1.1
Your product was carefully packed at the factory to ensure safe
transport. Nevertheless, if the box is damaged inspect the unit
immediately for signs of damage.
If the unit is damaged please do NOT return it to us, but notify your dealer
and the shipping company immediately; otherwise, claims for damage or
replacement may not be granted.
Always use the original box to prevent damage during
◊
storage or transport.
Make sure that children cannot play unsupervised with the
◊
unit or its packaging.
Please ensure proper disposal of all packing materials.
◊
Initial operation1.2
Ensure adequate air supply and to avoid overheating do not
place the unit near radiators etc.
Blown fuses must be replaced by fuses of the correct rating!
◊
Please refer to the “Specications” section for the
applicable rating.
For connection to the mains use the enclosed power cord with
cold connector which complies with the relevant safety
regulations.
Please make sure that all devices are properly grounded.
◊
For your own safety, never remove or disable the ground
conductors from the devices or on the power cords. The
unit must always be connected to the mains outlet with a
protective grounding connection.
Caution
!
This loudspeaker is capable of producing extreme volumes.
◊
Please keep in mind that high sound pressures do not only
temporarily damage your sense of hearing, but can also
cause permanent hearing damage. Be careful to select a
suitable volume at all times.
Important notes concerning installation
The sound quality may diminish within the range of
◊
powerful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online registration1.3
Please register your new BEHRINGER equipment right after
your purchase by visiting http://www.behringer.com and read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our
intention to have it repaired as quickly as possible. To arrange
for warranty service, please contact the BEHRINGER retailer
from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may
directly contact one of our subsidiaries. Corresponding contact
information is included in the original equipment packaging
(Global Contact Information/European Contact Information).
Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support
area of our website (http://www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims more quickly and efciently.
Thank you for your cooperation!
Control Elements and 2.
Connections
Use this ¼" stereo jack to connect a signal source that has
[1]
¼" output.
Use this XLR connector to connect a signal source that has
[2]
XLR output.
Always use either the XLR or the ¼" jack input, and use the
◊
LEVEL control {4} to adapt the input sensitivity. Never use
both inputs at the same time!
Fig.2.1: Control elements and connections (B312A and B315A)