Filter
Top Products
5
B-CONTROL NANO BCN44
2. CONTROL ELEMENTS AND CONNECTIONS
2. CONTROL ELEMENTS AND CONNECTIONS
Fig. 2.1: BCN44s control elements
Use the left PRESET button to select the next preset down.
Use the right PRESET button to select the next preset up.
+ To select presets more quickly, keep one of the preset buttons pressed and simultaneously
turn one of the push encoders. The new preset is active as soon as you release the preset key.
PANIC: This function restores the most important MIDI data back to their factory settings.
s Press both PRESET buttons simultaneously. The unit resets as soon as the buttons are pressed.
s After the reset is complete, the unit automatically resumes normal operation and the current preset is
shown in the display.
When powering up the unit, the four-digit LED display shows the current operating software version.
After that, the display switches to displaying the last selected preset. Each time you change a setting
using any of the control elements, the LED shows this value change in real time. When in programming
mode, MIDI commands, program/channel numbers and parameter values are shown.
+ Additional display functions are described under .
Use the STORE button to store presets.
s Press the STORE button. The button LED starts blinking.
s Select the desired preset using the PRESET buttons or keep one of the PRESET buttons pressed and