Filter
Top Products
5
PRO MIXER DX052
1. INTRODUCTION
1. INTRODUCTION
Your purchase of the BEHRINGER PRO MIXER DX052 has put
you at the forefront of todays trends in DJ mixing consoles.
Numerous features, such as the beat counter and XPQ 3D
surround effect, enable you to work in completely new and
creative ways. The DX052 is a mixer for professional use, it is
extremely easy to operate and it helps you give free rein to your
creativity.
Time is tight and if you dont want to be left in the dust, youd
better get moving. To help you along, we have developed an
excellent DJ mixing console with the most popular new features
and technologies. It is perfectly suited for use in dance clubs or
for DJ systems and is sure to deliver tons of pure fun.
Be honest: who really likes to read manuals? We know you
want to get started right away, but it is only after reading these
instructions that you will fully understand and be able to properly
use all the features your DX052 has to offer. Take the time to
read everything through!
+ The following users manual is intended to
familiarize you with the units control elements,
so that you can master all the functions. After having
thoroughly read the users manual, store it at a safe
place for future reference.
1.1 Before you get started
1.1.1 Shipment
The PRO MIXER was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of damage.
+ Damaged units should NEVER be sent directly to us.
Please inform the dealer from whom you acquired
the unit immediately as well as the transportation
company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may
be rendered invalid.
1.1.2 Initial operation
Please make sure the unit is provided with sufficient ventilation,
and never place the PRO MIXER on top of an amplifier or in the
vicinity of a heater to avoid the risk of overheating.
+ Before plugging the unit into a power socket, please
make sure you have selected the correct voltage:
The fuse compartment near the power plug socket contains
three triangular markings. Two of these triangles are opposite
one another. The voltage indicated adjacent to these markings is
the voltage to which your unit has been set up, and can be
altered by rotating the fuse compartment by 180°. ATTENTION:
This does not apply to export models that were for
example manufactured only for use with 120 V!
+ If you alter the units voltage, you must change the
fuses accordingly. The correct value of the fuses
needed can be found in the chapter
SPECIFICATIONS.
+ Faulty fuses must be replaced with fuses of
appropriate rating without exception! The correct
value of the fuses needed can be found in the
chapter SPECIFICATIONS.
Power is delivered via the cable enclosed with the unit. All
requiered safety precautions have been adhered to.
+ Please make sure that the unit is grounded at all
times. For your own protection, you should never
tamper with the grounding of the cable or the unit
itself.
1.1.3 Warranty
Please take a few minutes and send us the completely filled
out warranty card within 14 days of the date of purchase. You
may also register online at www.behringer.com. The serial
number needed for the registration is located at the top of the
unit. Failure to register your product may void future warranty
claims.
1.2 The users manual
This users manual has been written in such a way to enable
you an overview over the control elements of the unit and offers
at the same time detailed information about possible applications.
To facilitate quick look-ups, control elements have been described
in groups depending on their function. Should you need detailed
information about specific topics not covered in this manual,
please visit our website at www.behringer.com.
ATTENTION!
+ We would like to bring your attention to the fact
that extremely loud sound levels may damage your
hearing as well as your headphones. Please lower
all OUTPUT LEVEL knobs leftwards before powering
up the unit.