Behringer LX1B PRO DJ Equipment User Manual


 
17 BASS V-AMP LX1B/BASS V-AMP PRO LX1B PRO User Manual
8.5 AES/EBU and S/PDIF standards
In general, there are two dierent standards when the subject is digital signal
processing. AES/EBU is the professional, balanced connection with XLR jack
connectors. This interface is based on two identical protocols published in
November 1985 by the European Broadcast Union (EBU Tech. 3250-E) and in
December 1985 by the Audio Engineering Society (AES3-1985). Sony and Philips
oriented themselves around this standard and developed an additional interface
with unbalanced signal routing and several important dierences that primarily
have to do with allocating channel status bits. This standard, named after the
two com-panies (S/PDIF = Sony/Philips Digital Interface) uses either cinch jacks
or a digital connection with optical cables. It is relevant mostly because of the
attempt to introduce copy protection embedded in the IEC 958 norm. This norm
describes both the re-worked AES/EBU interface that has been modied to work
with the S/PDIF format and described as IEC 958 Typ I (Professional). The formal
description of the S/PDIF interface is IEC 958 Typ II (Consumer).
9. Specications
BASS V-AMP
Audio Inputs
Instrument Input ¼" TS connector, unbalanced
Input impedance 1 M
Max. input level +3 dBu
AUX IN ¼" TRS connector, balanced
Input impedance 50 k
Audio Outputs
Analog Line Outputs L/R ¼" TS connectors, unbalanced
Output impedance approx. 680 
Max. output level +20 dBu
Headphones ¼" TRS connector, unbalanced
Max. output level +15 dBu/100  (+23 dBm)
MIDI
Type 5-pole DIN jacks IN, OUT/THRU
Digital Signal Processing
Converter 24-bit Delta-Sigma,
64/128-times oversampling
Dynamics A/D 100 dB @ preamp bypass
Dynamics D/A 92 dB
Sample rate 31.250 kHz
DSP 100 Mips
Delay time max. 1023 ms stereo/sampler delay:
15.36 s
Run time (Line In Line Out) approx. 5 ms
Display
Type 2-digit 7-segment-LED display
Power Supply
Mains Voltage
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
China/Korea 220 V~, 50Hz
Japan 100 V~, 50 - 60 Hz
Power consumption 13 W
Mains connection external power supply