Filter
Top Products
16 TUBE ULTRAGAIN MIC200 User Manual
2.2 Rear panel
(12)
(11)
(10)
Fig. 2.2: The rear panel of your MIC200
(10) The balanced ¼" TRS INPUT of your MIC200 can be used to connect your
electric guitar, for example. This input is wired parallelly to the XLR input.
Ideally, the balanced XLR INPUT should be used to connecta microphone.
◊ In contrast to its outputs, the MIC200’s inputs should never be
used simultaneously!
(11) This is the balanced XLR OUTPUT of your MIC200. Use this connector to feed the
XLR input of your mixing console, multitrack recorder or power amp.
The balanced ¼" TRS OUTPUT of your MIC200 can also be connected to a mixer,
recording system or power amp.
(12) Use the POWER SUPPLY CONNECTOR to hook up the enclosed power supply
unit. Next to this connector you’ll nd the strain relief clamp, which prevents
accidental release of the power supply.
The device’s SERIAL NUMBER is found on the bottom side of the unit.