Filter
Top Products
ENGLISH
EUROPOWER PMP960M/PMP980S/PMP1280S User Manual
8
anced and unbalanced connectors. The Tape Ins and Outs are on
stereo RCA connectors.
Please ensure that only qualied personnel install and
◊
operate the power mixer. During installation and opera-
tion, the user must have sufcient electrical contact to
earth. Electrostatic charges might affect the operation of
the unit.
input
output
For unbalanced use, pin 1 and pin 3 have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
12
3
1
2
3
Balanced use with XLR connectors
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Unbalanced ¼” TS connector
Tip
(signal)
Fig. 4.1: ¼" TS connector
Fig. 4.2: ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced 1/4" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.3: XLR connectors
strain relief clamp
sleeve
tip
sleeve
pole 1/ground
tip
pole 2
The footswitch connects both poles momentarily
1/4" TS footswitch connector
Fig. 4.4: ¼" TS connector for footswitch