Filter
Top Products
15 EUROPOWER PMP1000/PMP3000/PMP5000 User Manual
Specifications6.
PMP1000
Microphone Inputs
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 136 dB A-weighted
@ 50 Ω source resistance -131.5 dB / 134 dB A-weighted
@ 150 Ω source resistance -129 dB / 131 dB A-weighted
Frequency response < 10 Hz - 155 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced / 1.3 kΩ unbalanced
Signal-to-noise ratio 109 dB / 112 dB A-weighted
(0 dBu IN @ +10 dB gain)
Distortion (THD + N) 0.002% / 0.0018% A-weighted
Mono Line Inputs
Type ¼" TS connectors, balanced
Impedance approx. 20 KΩ
Max. input level +21 dBu
Stereo Line Inputs
Type ¼" TRS connectors, unbalanced
Impedance > 3.6 kΩ
Max. input level +22 dBu
Equalizer
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
CD/Tape Input
Type RCA
Impedance approx. 3.6 kΩ, balanced
Max. input level +21 dBu
Pre Amp Outputs
Main
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ω, unbalanced
Max. output level +21 dBu
Monitor
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ω, unbalanced
Max. output level +21 dBu
Stereo Outputs
Type —
Impedance —
Max. output level —
Type RCA
Impedance approx. 1 kΩ
Max. output level +21 dBu
Main Mix System Data
Noise
MAIN MIX @ -∞ -102 dB/-106 dB A-weighted
Channel fader -∞
MAIN MIX @ 0 dB -88 dB/-91 dB A-weighted
Channel fader -∞
MAIN MIX @ 0 dB -84 dB/-86 dB A-weighted
Channel fader @ 0 dB
Loudspeaker Outputs
Type compatible to NEUTRIK SPEAKON
Load impedance
MAIN L/R 4 - 8 Ω
MONITOR/MAIN MONO 4 - 8 Ω
MAIN MONO/MAIN MONO 4 - 8 Ω
BRIDGE 8 - 16 Ω