Filter
Top Products
Page 2 of 5
Top tone—in full e ect
The V-AMP 3 gives you anger, chorus,
compression, delay and 12 other beautiful
digital e ects to apply to your sound.
Adjust the e ect’s level in the mix via the
EFFECTS dial. To adjust e ect parameters,
you can rhythmically press the TAP
button to alter delay times or LFO speeds,
or hold down the TAP button and twist
the EFFECTS knob to access e.g. feedback
or depth. By using a MIDI pedal, such as
the BEHRINGER FCB1010, you can access
an additional Wah Wah e ect. You can
adjust the lter characteristic by entering
EDIT mode, selecting the DRIVE menu and
turning the EFFECTS knob while holding
the TAP button.
Presenting the presets
All of these elements have been
combined into 125 di erent presets
divided into 25 banks, accessible through
the BANK UP/BANK DOWN buttons.
Within each bank, you can press buttons A
through E to explore its di erent presets.
You can also create and save your own
presets. Start by selecting a preset, then
making any changes you wish: amp, EQ,
e ect, etc. The preset LED will begin to
ash, indicating that the V-AMP 3 is ready
to save your settings. To do this, hold
the preset button down for about two
seconds. Once the LED stops ashing,
you have saved the modi ed preset.
On top of all this, the V-AMP 3 also
features a built-in tuner and noise gate.
In essence, it’s a Swiss Army Knife for the
home recording enthusiast or gigging
guitarist who can’t seem to settle on
one amp.
Stunning in the studio
The V-AMP 3 features several
con gurations that make it an
invaluable asset in the studio. Access the
con guration menu by pressing the B
and D buttons at the same time. Then use
BANK UP and BANK DOWN to select a
con guration.
When using headphones, the V-AMP
3 will switch into Studio Mode 1 (S1).
This stereo mode works well for both
monitoring and recording with e ects,
amp and speaker modeling. It doesn’t
apply the additional three-band EQ to the
signal, but most recording programs—like
energyXT2.5— have their own EQ.
In Studio Mode 2 (S2), the V-AMP 3
sends a signal with amp and speaker
simulation, but only the right output has
e ects. You can either record both left and
right outputs to separate tracks, or record
the ”dry“ left output while monitoring the
right output.
Stellar on stage
The V-AMP 3 has three live
con gurations. When performing live with
this device, you can either run it to an amp
on stage, run directly to the mixing board,
or both. Live Mode 1 is the best choice
for running the outputs directly to the
mixer, because it applies amp and speaker
simulation, e ects and an additional
3-band EQ.
Continued on next page
Balanced stereo Line output can
be con gured for many recording
and live applications
Adjustable auto-chromatic tuner
plus e ective global con gurations
and equalization easily adapts the
V-AMP 3 to any situation outside your
home studio
MIDI implementation includes
program changes, control changes
and SysEx, allowing complete MIDI
remote control or automation with
your energyXT2.5 or other DAW
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
HPS3000V-AMP3
UCA222
USB Audio Interface
Laptop
V-AMP3