Behringer VT100FX/VT50FX Musical Instrument Amplifier User Manual


 
9 VIRTUBE VT250FX/VT100FX/VT50FX/VT100FXH User Manual
4. Installation
Except for the headphones output and the CD IN input (¼" TRS connectors),
all audio inputs and outputs on the BEHRINGER VIRTUBE are on ¼" TS connectors.
Please see Chapter 5, “Specications” for more information.
Please ensure that the unit is installed and operated only by people
qualified to do so. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic discharge may affect
the operation of the unit.
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 4.1: ¼" TS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.2: ¼" TRS connector
R
L
R
L
ring
tip
sleeve
tip
tip
sleeve
sleeve
Fig. 4.3: Stereo adapter cable
sleevesleeve
tiptip
Fig. 4.4: Mono adapter cable