Filter
Top Products
Call Station
The call station is used to make announcements in pre‑selected loudspeaker zones.
Notice!
Upon start up, the call stations will need to be identified by the processor. During this period
the LEDs will flash in a rotating sequence; once this is complete the system is ready. Allow
approx. 15 seconds before attempting an announcement.
1
3 3
2
4
5
Number Item Description
1 Microphone Flexible gooseneck microphone stem with paging call activity LEDs (green).
2 Zone label Paper labels can be inserted behind the thin plastic cover. Paper labels can be typed
and printed out via the PC GUI software.
3 Zone selection
button
This section allows the user to select the zone(s) that have been previously
configured in the PC GUI Software.
3 Zone selection
LED
1‑8 selection LED indicator (green/on = zone selected). On start up LEDs flash in a
sequence.
4 PTT LED – Bi‑color LEDs above the PTT button indicating:
– Red: Busy. Another call-station is currently making a call/announcement.
This call-station cannot be used to make a paging call, until the current call/
announcement is finished.
– Yellow: Wait. Your paging call is attempting to start. Do not speak yet.
– Green: Ready. The call station microphone is active, you may talk.
5 PTT button – Press‑to‑talk (paging call) button. Keep button pushed down to continue to talk.
Continue with:
– Pre-settings and selections, page 34
– Making an announcement, page 34
8.2
PLENA matrix Operation | en 33
Bosch Security Systems B.V. Operation manual 2013-06 | V1.0 |