Filter
Top Products
E-44
Playing Back from Song Memory
Use the following procedure to play back song memory
contents.
To play back from song memory
1
Use the SONG MEMORY button to enter playback
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the SONG
MEMORY button to display it again.
2
Press the START/STOP button to start playback of
the song you selected.
• During memory playback you can use the TRACK 1
and TRACK 2 buttons to turn playback of either track
on or off.
• You can use the TEMPO buttons to adjust the tempo.
3
Press the START/STOP button again to stop
playback.
TRACK 1
TRACK 2
SONG MEMORY
START/STOP
MODE
[+] / [–]
TEMPO
Pla
y
o.N
Pla
y
No .
Indicators appear
NOTE
• During memory playback, the entire keyboard functions
as a melody keyboard, regardless of the MODE switch
setting.
• You can play along on the keyboard while playing back
from song memory. You can also use layer (page E-46)
and split (page E-46) to play along with more than one
tone.
• You cannot use pause, fast forward or fast reverse
operations with song memory playback.
Real-time Recording to Track 2
After you record Track 1, you can use real-time recording to
add a melody in Track 2.
To record to Track 2 while playing
back Track 1
1
Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
• The track is not yet selected at this point.
2
Press the TRACK 2 button to select Track 2.
Re c . N .o
Rec . No .
Flash Flash
Song Memory Function
704A-E-046A
CTK591_e_41-45.p65 03.10.7, 4:27 PM44