Filter
Top Products
E-17
Basic Operations
This section provides information on performing basic
keyboard operations.
To play the keyboard
1
Press the POWER button to turn the keyboard on.
2
Set the MODE switch to NORMAL.
3
Use the MAIN VOLUME slider to set the volume
to a relatively low level.
4
Play something on the keyboard.
• The keyboard’s initial power on default setting is Song
Bank Mode. The tone that is initially assigned to the
keyboard is 000 STEREO GRAND PIANO.
Selecting a Tone
This keyboard comes with 500 built-in tones. Use the
following procedure to select the tone you want.
To select a tone
1
Find the tone you want to use in the TONE List and
note its tone number.
• Not all of the available tones are shown on the tone
list printed on the keyboard console. For a complete
list, see the “Tone List” on page A-1.
2
Press the TONE button.
3
Use the number buttons to input the three-digit tone
number of the tone you want to select.
Example: To select “106 ACOUSTIC BASS”, input 1, 0
and then 6.
NOTE
• Always input all three digits for the tone number,
including leading zeros (if any). If you input one or two
digits and stop, the display will automatically clear your
input after a few seconds.
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
• When one of the drum sets is selected (tone numbers
490 through 499), each keyboard key is assigned a
different percussion sound. See page A-6 for details.
Indicator appears
A
co
us .
Bs
706A-E-019A
TONEREVERB/CHORUSSING ALONG
Number buttons
[+] / [–]
MODE
POWER
MAIN VOLUME PIANO BANKSONG BANK