Filter
Top Products
E-28
662A-E-030A
TEMPO
RHYTHM
SONG BANK
To turn on LOCAL CONTROL/To turn off GM
mapping
1.
While in any mode besides the Song Bank Mode
(indicated when the SONG BANK indicator is
lit), hold down the RHYTHM button and press
the SONG BANK button.
• Perform step 2 within five seconds after performing
step 1.
2.
Use the TEMPO button ( ) to turn on local
control.
• This also turns off GM mapping.
Local
❚
NOTE
• Note that LOCAL CONTROL is also turned on automatically
whenever you turn on power, or when you press any of the
following buttons.
• START/STOP (to start rhythm or Song Bank tune play)
• ONE-KEY PLAY
• STEP 1
• STEP 2
• STEP 3
• DEMO (to start demo tune play)
• See the GM Tone Map List at the back of this manual for
information about tone assignments while GM mapping is turned
on.
LOCAL CONTROL (Default: on) /GM mapping
(Default: off)
This setting determines whether or not the keyboard and
sound source of this keyboard are connected internally. When
recording to a computer or other external device connected
to this keyboard’s MIDI IN/OUT terminal, it helps if you
turn LOCAL CONTROL off.
on: Anything played on the keyboard is sounded by the
internal sound source and simultaneously output as a
MIDI message from the MIDI OUT terminal.
oFF:Anything played on the keyboard is output as a MIDI
message from the MIDI OUT terminal, without being
sounded by the internal sound source. Turn LOCAL
CONTROL off whenever you are using the MIDI THRU
function of a computer or other external device. Also
note that no sound is produced by the keyboard if
LOCAL CONTROL is turned off and no external device
is connected.
❚
NOTE
• When you are using this keyboard in a stand-alone
configuration, keyboard keys do not light while local control is
turned off.
To turn off LOCAL CONTROL/To turn on GM
mapping
1.
While in any mode besides the Song Bank Mode
(indicated when the SONG BANK indicator is
lit), hold down the RHYTHM button and press
the SONG BANK button.
• Perform step 2 within five seconds after performing
step 1.
2.
Use the TEMPO button ( ) to turn off local
control.
• This also turns on GM mapping.
Local