Filter
Top Products
E-15
To change tones
1.
Look at the tone list printed on the keyboard’s
console and find the one you want.
2.
Press the TONE button.
3.
Use the number buttons to input the 2-digit
number that identifies the tone you want to
select.
Example: To select “26 ACOUSTIC BASS”, input 2 and
then 6.
❚
NOTE
• Always enter two digits for the tone number. If you enter only
one digit, the display will automatically return to the previous
tone number setting after a few seconds.
• If you change the tone setting while a keyboard key is
depressed, the tone does not change until you release the key
and press a keyboard key again.
• With certain tones (such as percussion sounds and sound
effects), there may be very little or no change at all in the pitch,
no matter which keyboard key you press.
• If you input the wrong first digit for a tone number, you can
return to the previous setting by pressing the TONE button.
This part of the manual provides you with the basic
information you need to use your keyboard.
To switch power on and off
1.
Set the POWER/MODE selector to NORMAL.
2.
Press the keyboard keys.
3.
The VOLUME up and down arrow buttons are
used to adjust main volume.
• Volume can be adjusted over a range of 0 (minimum)
to 9 (maximum).
• Volume is set to 7 when the power is turned on.
• A setting of 0 turns down the volume completely.
• The volume can be changed continuously by
continuously pressing down the or buttons.
• Pressing the and buttons simultaneously sets
the volume to level 7.
• Numeric values can be entered directly with the
number buttons after the VOLUME button has been
pressed in step 3.
• The amount that the volume setting raises or lowers
the volume level differs according to the tone, auto
accompaniment, or song you are using.
4.
To switch power off, set the POWER/MODE
selector to OFF position.
Basic Operations
640A-E-017A
Ac o .Ba s s
GrandPno
Indicator appears
VOLUME TONE
POWER/MODE
Number buttons
LK43_e_15-21.p65 02.2.25, 9:48 PMPage 15 Adobe PageMaker 6.5J/PPC