Filter
Top Products
E-30
Assembling the Stand
8.
After ensuring that all of the screws are fully
tightened, remove the packing material and
stand up the stand.
• After standing up the stand, cover each of the eight
screws you have installed up to this point with screw
caps
.
9.
Attach the brackets to the pedal unit ,
and temporarily secure them with screws
.
10.
Remove the screws that hold the corner
brackets in place on the back corners (the
corners away from the pianist) of the side
panels.
11.
As shown in the illustration, reverse the
corner brackets you removed in step 10, and
insert pedal unit brackets
-(a)
and
-(b)
between the each of the corner brackets and
the side panels
and .
*WARNING
• The corner brackets help to prevent the stand from
tipping over. Whenever the stand is in a location that
is not up against a wall, reorient the corner brackets
as shown in the illustration. Leaving the corner
brackets in their original orientations can make it
easy for the stand to tip over towards the back,
creating the risk of personal injury.
12.
Securely tighten the screws that you
temporarily tightened in step 9.
• Cover the screw heads with the caps
.
If you plan to locate the digital piano against a wall,
proceed to step 10 on page E-31.
I
-(b)
I
-(a)
F
G
G
B
A
I
-(b)
I
-(a)
B
A
G
J
B