Filter
Top Products
E-13
General Guide
11. Chord name display
Shows chord names while auto accompaniment is
being used.
12. Pointers
A pointer appears next to the applicable function
when you have voice fingering guide, touch
response, or key lighting turned on.
Display examples shown in this User’s Guide are intended
for illustrative purposes only. The actual text and values
that appear on the display may differ from the examples
shown here.
Under certain conditions, you can display a digital level
meter secreen. The level meter has 16 segments, divided
between two lines of eight segments each. Besides showing
the volume level of each part that is turned on, the level meter
also indicates the current on/off status of each track. During
Squencer playback standby, the level meter can be used to
check which track has data stored in it.
You can display the level meter in the following cases.
While the tone/rhythm screen is on the display
In the Music Library Mode
During sequencer playback standby
During sequencer playback
J To display the level meter
1. While holding down the FUNCTION button,
press the EFFECT/(L. METER) button.
1
Currently selected mixer group
2 Upper row
3 High level
4 Low level
5 Indicates part is off or does not exist
6 Indicates part is on
7 Lower row
2. Hold down the FUNCTION button and press the
LAYER/(GROUP A/B) button to cycle through
the mixer group settings.
The information being displayed in the upper
row and lower row of the level meter depends on
the currently selected mixer group (page E-46), as
shown below.
* [A ] ..... Group A (Internal)
The upper level meter row shows this:
Upper 1, Upper 2, Lower 1, Lower 2,
Harmonize 1, Harmonize 2
The lower level meter row shows this:
Percussion, Bass, Chord 1, Chord 2, Chord 3,
Chord 4, Chord 5
* [ B] ..... Group B (External)
The upper level meter row shows this:
Part 1 through Part 8
The lower level meter row shows this:
Part 9 through Part 16
*[AB]
Displaying the level meter screen while in the
Music Library Mode displays the parts of
both mixer groups (A and B).
3. To exit the level meter display, press the EXIT/
NO button.
Level Meter Screen
426-E-015A
PL40NE01-1.book 13 ページ ２００２年７月２３日 火曜日 午後６時５２分