Filter
Top Products
E-25
Tone Change Data (Program Change)
A program number is data used for tone selection. Program numbers come in handy when using the tones of this digital piano to
play MIDI data received from an external sequencer or other MIDI device. When the program number received from another
devices does not match one of the built-in tones of this digital piano, however, the tone change is ignored and play continues
without a tone change.
The following shows the program numbers that are supported by this digital piano.
Pedal and Effect Operation Data (Control Change and Universal System Exclusive
Message)
Control Change is used to send and receive data about damper, soft, and sostenuto pedal* depress and release operations, as well
as data about digital effects.
* You can connect up to two pedals to this digital piano. You can also specify either soft or sostenuto as the effect of the pedal
connected to the SOFT/SOSTENUTO jack. Pressing a pedal connected to the SOFT/SOSTENUTO jack sends data that
corresponds to the effect (soft or sostenuto) currently selected for the pedal.
GRAND PIANO 1 0 0 0 0 0 0
GRAND PIANO 2 0 0 1 0 0 1
BRIGHT PIANO 0 0 2 0 0 2
MELLOW PIANO 0 0 3 0 0 3
ELEC PIANO 1 0 0 4 0 0 4
ELEC PIANO 2 0 0 5 0 0 5
VIBRAPHONE 0 0 11 0 0 11
HARPSICHORD 0 0 6 0 0 6
ToneName
Send Receive
Bank Select
MSB LSB
Program
numbers
Bank Select
MSB LSB
Program
numbers
424A-E-027A
PS20_E_22-25.p65 02.2.4, 7:12 PMPage 25 Adobe PageMaker 6.5J/PPC