Filter
Top Products
E-20
Recording to and Playing Back from Song Memory
To record to a track while playing
back from the other
After you finish recording, you can play back Track 1
and Track 2 at the same time.
Example: To record to Track 2 while playing back the
contents of Track 1
1
Press the SONG MEMORY button once.
• This causes the SONG MEMORY indicator
lamp to light.
2
Press the TRACK 1/L TRACK 2/R button
so TRACK 1/L indicator is lit.
3
Press the SONG MEMORY button again.
• This causes the TRACK 1/L indicator lamp to
flash. Press theTRACK 1/L TRACK 2/R button
again, so it causes the TRACK 2/R indicator
lamp to flash, which indicates that the piano is
standing by for recording to Track 2.
• Select the tone and effects you want to use while
recording.
4
Press the START/STOP button or play
something on the keyboard to start
simultaneous playback from Track 1 and
recording to Track 2.
5
When you are finished, press the START/
STOP button again to stop recording.
Playing Back from Song Memory
1
Press the SONG MEMORY button once.
• This causes the SONG MEMORY indicator
lamp to light.
2
Use the TRACK 1/L TRACK 2/R button to
select the track you want to play back.
● The indicator lamps above the button show the
currently selected track.
• To play back Track 1, the TRACK 1/L
indicator lamp should be lit.
• To play back Track 2, the TRACK 2/R
indicator lamp should be lit.
• To play back Track 1 and Track 2, both the
indicator lamps should be lit.
3
Press the START/STOP button.
• This starts playback of the track you selected.
• You can change the tempo setting as a track is
playing.
• As a track is playing, you can turn the
metronome on or off using the METRONOME
button.
• You cannot change the tone setting during
playback.
• Press the START/STOP button again to stop
playback.
To delete song memory data
IMPORTANT!
• The procedure below deletes all of the data from the
selected track. Note that the delete operation cannot be
undone. Check to make sure you really do not need the
data in Song Memory before you perform the following
steps.
1
Press the SONG MEMORY button twice.
• This causes the SONG MEMORY indicator
lamp to be flashing.
2
Use the TRACK 1/L TRACK 2/R button to
select the track you want to delete.
• The indicator lamps above the button show the
currently selected track.
• To delete Track 1, the TRACK 1/L indicator
lamp should be flashing.
• To delete Track 2, the TRACK 2/R indicator
lamp should be flashing.
3
Hold down the SONG MEMORY button
until its indicator lamp stops flashing and
remains lit.
4
Press the TRACK 1/L TRACK 2/R button.
• This deletes the contents of the track.
413A-E-022A