Filter
Top Products
15
9.14 Vibrato Depth (4DH)
Format
Note 1:
For information about the relationship between setting values and send/receive values, see “26.4 –64 - 0 - +63 Setting
Value Table” in “Part VII Setting Values and Send/Receive Values” of this document.
Send
This message is not sent by this Instrument.
Receive
Receipt changes the vibrato auto depth of the tone that is currently selected by the applicable part.
9.15 Vibrato Delay (4EH)
Format
Note 1:
For information about the relationship between setting values and send/receive values, see “26.4 –64 - 0 - +63 Setting
Value Table” in “Part VII Setting Values and Send/Receive Values” of this document.
Send
This message is not sent by this Instrument.
Receive
Receipt changes the vibrato auto delay of the tone that is currently selected by the applicable part.
9.16 Portamento Control (54H)
Format
Send
This message is not sent by this Instrument.
Receive
Receipt of this message first stores the Source Note Number for the next note. When the next Note On is received, the
portamento effect is applied to the note using this Source Note Number as the pitch start point and the Note On event key
number as the end point. If there already is a note being sounded by Source Note Number at this time, the new note on
is not performed and the portamento effect is applied to the pitch of the note being sounded. That is to say that legato
play is performed.
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Message Format: BnH 54H vvH
n: MIDI Channel Number
kk: Source Note Number