Filter
Top Products
30
16.3.6 cat : Category
0cccccccB = Category (7bit)
The category indicates the categories of data handled by the System Exclusive Message. The ID number (ID) of the category
is indicated on the left, while the communication operation (Action) is indicated on the right.
A.. Available (Also including when only some parameters are available.)
F... File Information (Not the data itself. Name, size, and other file information only.)
16.3.7 mem : Memory Area ID
Specifies the memory area that is the object of the parameter transfer. The following are defined for this Instrument. Basically,
Instrument-specific System Exclusive messages are valid for user area data only.
16.3.8 pset : Parameter Set Number
This field is a 2-byte (LSB, MSB) value indicating the number of the parameter set (mmmmmmmnnnnnnnB, binary) being
transferred.
16.3.9 blk : Block Number
This supplementary number specifies which block is the object when there are multiple blocks within the same parameter set.
When there are multiple parameters with the same ID inside the same category, as with the mixer channel volume setting
for example, the block number required to specify to which block data belongs is specified as: kkkkkkkjjjjjjjiiiiiiiB (Binary).
When the parameter block has a multi-dimensional array structure, bit 21 of the block number is divided into prescribed
bit fields based on the rules explained below.
Format: 0cccccccB
Category Transfer
ID (c) Parameter Set Individual Parameter
00H System A
01H Setup A
02H Patch A
03H Tone A
21H Music Library F
Format: 0mmmmmmmB
mem Data Type Meaning
0 User area Read/write enabled
1 Preset area Read/write disabled
Format: LSB 0nnnnnnnB
MSB 0mmmmmmmB
Format: 0iiiiiiiB (LSB) 0jjjjjjjB 0kkkkkkkB (MSB)