Filter
Top Products
English
Saving Keyboard Setups to Registration Memory
E-47
1.
Press
bq
.
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3.
Press
bt
to select the bank you want.
Each press of
bt
cycles through the bank numbers.
• You also can select a bank by holding down
bt
as you
use the
bs
(10-key) number buttons to enter a bank
number.
4.
While holding down
co
, press a button from
ck
to
cn
to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
1.
Press
bt
to select the bank that contains the
setup you want to recall.
2.
Use buttons
ck
to
cn
to select the area whose
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-16). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
• SD memory card (WK-500 only) (page E-61)
• Computer (page E-68)
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in registration memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
1
to turn off power.
To save a setup to registration
memory
Lights
Bank number
Bank 4
Store
Stored in Setup 4-1
To recall a setup from registration
memory
Bank 6
Recal l
Setup 6-1 recalled
WK200_e.book 47 ページ ２００８年５月１６日 金曜日 午後８時４４分