Filter
Top Products
Using a Memory Card
E-141
1.
Insert the memory card into the card slot.
2.
Press the C-9 (CARD) button to enter the card
mode.
3.
While holding down the R-13 (FUNCTION)
button, press the C-17 (MENU) button.
• This displays the function menu “Play/CardUtl” screen.
4.
Use the R-17 (t, y) buttons to move the 0 to
“FileDelete” and then press the R-16 (ENTER)
button.
• This displays a screen for specifying the file to be
deleted.
5.
Use the dial or R-14 (–, +) buttons to display the
file you want to delete.
6.
Press the R-16 (ENTER) button.
7.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to delete
or the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button displays the message
“Please Wait” (indicating the operation is in progress).
Do not perform any operation while this message is on
the display. “Complete” appears on the display after the
operation is complete.
1.
Insert the memory card into the card slot.
2.
Press the C-9 (CARD) button to enter the card
mode.
3.
While holding down the R-13 (FUNCTION)
button, press the C-17 (MENU) button.
• This displays the function menu “Play/CardUtl” screen.
4.
Use the R-17 (i, y) buttons to move the 0 to
“FileRename” and then press the R-16 (ENTER)
button.
• This displays a screen for specifying the file to be
renamed.
5.
Use the dial or R-14 (–, +) buttons to display the
file you want to rename.
6.
Use the R-17 (u, i) buttons to move the
cursor to the name character position you want
to change, and then use the dial or R-14 (–, +)
buttons to select the character you want.
• For details about the characters you can input, see
“Supported Input Characters” (page E-160).
• To input a space, press both of the R-14 (–, +) buttons
at the same time.
7.
After the name is the way you want, press the
R-16 (ENTER) button.
8.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to rename
the file or the R-14 (NO) button to cancel.
• Pressing the R-14 (YES) button displays the message
“Please Wait” (indicating the operation is in progress).
Do not perform any operation while this message is on
the display. “Complete” appears on the display after the
operation is complete.
To delete a file from a memory
card
To rename a file on a memory
card
CTK7000_e.book 141 ページ ２０１０年７月２１日 水曜日 午後５時１５分