Filter
Top Products
E-130
Using the Function Menu
The function menu contains items for tuning and touch
adjustments, local on/off, and other global settings that need
to be changed by you relatively infrequently. It also includes
some memory card operations (format, etc.).
This section explains function menu operations. For details
about specific function menu items, see “Function Menu
Settings” (page E-131).
1.
Press the R-13 (FUNCTION) button.
• This displays the function menu like the one shown
below.
2.
To adjust the “Tune” (Tuning) setting, use the
dial or the R-14 (–, +) buttons to change the
value inside the thick brackets (%).
• Pressing the R-14 (–, +) buttons at the same time
returns the setting to its initial default.
• Changing the tuning value does not affect audio
playback (page E-126).
3.
The setting items from “Performance” and
below are groups that include multiple setting
items. Use the following procedure to change
the settings of the items in each group.
R-15R-15
R-16R-16R-14R-14
R-13R-13
R-17R-17
C-17C-17 R-18R-18
Using the Function Menu
To change the setting of a function menu
item
(1)Use the R-17 (t, y) buttons to move the 0 to the
desired group name and then press the R-16 (ENTER)
button.
• This displays the items included within the group.
(2)Use the R-17 (t, y, u, i) buttons to move the 0
to the setting you want to change.
(3)Use the dial or the R-14 (–, +) buttons to change the
setting value.
• Pressing the R-14 (–, +) buttons at the same time
returns an item to its initial default setting.
(4)To return to the function menu, press the R-15 (EXIT)
button.
Example: Performance group
CTK7000_06_e.fm 130 ページ ２０１０年７月２７日 火曜日 午後３時４９分