Casio WK7500E1A Electronic Keyboard User Manual


 
Using the Function Menu
E-131
4.
To exit the function menu, press the R-13
(FUNCTION) button or R-15 (EXIT) button.
Note that all function menu settings you configure are
returned to their initial defaults whenever you turn off
the Digital Keyboard. You can configure the Digital
Keyboard so it remembers its latest settings or to apply
predetermined default settings each time you turn it on.
For details, see “AutoResume (Auto Resume)” (page
E-134) and “Default (Default Settings)” (page E-134).
Some function menu settings also can be saved to
registration memory. For details, see “Saving
Keyboard Setups to Registration Memory” (page E-66).
This section explains the meaning of each function menu
setting item, and provides information about setting ranges
and initial default values.
For each item, the initial default setting is indicated by an
asterisk (*).
Fine tunes the overall keyboar tuning in 0.1 Hz steps.
A4=415.5 - 440.0
*
- 465.9Hz
Changing the tuning value does not affect audio playback
(page E-126).
You can directly display this group screen without going
through the function menu. While the initial power on
screen is displayed, hold down the R-13 (FUNCTION)
button as you press the C-17 (MENU) button.
Select one of the settings below to specify the relationship
between key pressure and note volume.
Specifies the velocity value setting when the Touch setting is
off.
000 - 100
*
- 127
Specifies the operation of the pedal connected to T-3
(SUSTAIN/ASSIGNABLE JACK).
Specifies the range of pitch change that occurs when the
PITCH BEND wheel (S-1) is rotated.
00 - 02
*
- 24 semitones
Specifies the how arpeggio is played in accordance with
pressed keyboard keys when the arpeggiator (page E-23) is
being used.
When “on” is selected for this setting, you can turn off
arpeggio play pressing the R-18 (AUTO HARMONIZE/
ARPEGGIATOR) button to disable the arpeggiator, or you
can change this setting to “oFF”.
Function Menu Settings
Tune (Tuning)
Performance (Performance/Accompaniment)
Group
Touch (Touch Response)
oFF: Constant note volume regardless of keyboard pressure
1
*
:Normal
2 : Strong sound even with light pressure
TchOffVel (Touch Off Velocity)
Ped.Assign (Pedal Assign)
SUS
*
: Sustain pedal
SSt : Sostenuto pedal
SFt : Soft pedal
rHy :Start/stop switch
BendRange (Bend Range)
ArpegHold (Arpeggiator Hold)
oFF
*
: Arpeggio played while the keys of a chord are
depressed on the keyboard
on :Arpeggio played after keyboard keys are released
CTK7000_06_e.fm 131 ページ 2010年7月27日 火曜日 午後3時49分