Filter
Top Products
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of
the fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
Hanging Clamp
• When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
• Safety cables should always be used.
• Never mount in places where the fixture will be exposed to rain, high
humidity, ext
reme temperature changes or restricted ventilation.
Note!
Clamp is sold separatel
y
.
4. OPERATING INSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD
Display. NOTE: The display will turn off after 10 seconds if no buttons are pushed.
MODE
/ESC
Button Function
<MODE/ESC>
Used to access the menu or to scroll
through to
p-level menu items.
<UP>
Scrolls through menu options in ascending
order
<DOWN>
Scrolls through menu options in descending
order
<ENTER>
Used to select and store the current menu
or option
within a menu
UP
DOWN
ENTER
CO
NTROL PANEL
The Control Panel LED Display shows the menu items you select from the menu map on the next
page. When a m
enu function is selected, the display will show immediately the first available option
for the selected menu function. To select a menu item, press <ENTER>.
Press the <MO
DE/ESC> button once to activate the control panel. Pressing the <MODE/ESC> button
again will scroll through the different top-level menu options available. Use the <UP> and <DOWN>
buttons to navigate the menu options. Press the <ENTER> button to access the menu function
currently displayed or to enable a menu option. To return to the previous option or menu without
changing the value, press the <MODE/ESC> button.
DMX Signal Indicator
Stage Mover Manual 10 2007-04-13/09:39