Filter
Top Products
Menu Map
enu Functions
DESCRIPTION
M
MENU OPTION
DMX: The fixture will be controlled by a DMX signal coming from a DMX controller.
ess must be sele
cted, and can be set using the up and down The starting addr
buttons.
Stand Alone – Automatic: The b
uilt in programs will trigger automatically to a pre-
programmed speed time.
Sound Active – Master Unit: S
ets the fixture to Master status for Master-Slave
operation and the built in programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone operation.
Slave Unit: Sets
the fixture to run in sync with the Master. You must set the first
fixture in the data link to “Master” otherwise nothing will happen.
User Configurations
ERTING OR NON-INVERTING:
TO SET THE PAN TO INV
1) Press <MODE/ESC> until is displayed. Use the <UP> and <DOWN> buttons to
scroll through the two options.
is non-inverting; is inverting.
Stage Mover Manual 11 2007-04-13/09:39