Filter
Top Products
PCA-6780 User Manual 40
3.2.7 PnP/PCI Configurations
NOTE: This “PnP/PCI Configurations” option is setting up the IRQ and
DMA (both PnP and PCI bus assignments.
• Init Display First [PCI Slot]
This item is setting for start up Video output from PCI or Onboard device.
• Reset Configuration Data [Disabled]
This item allow user to clear any PnP configuration data stored in the
BIOS.
• Resources Controlled By [Auto (ESCD)]
• PCI VGA Palette Snoop[Disabled]
The item is designed to solve problems caused by some non-standard
VGA cards. A built-in VGA system does not need this function.
• INT Pin 1~8 Assignment [Auto]
The interrupt request (IRQ) line assigned to a device connected to the PCI
interface on your system.
IRQ Resources This item allows you respectively assign an interrup-
tive type for IRQ-3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.
DMA Resources This item allows you respectively assign an interrup-
tive type for DMA, 0, 1, 2, 3, 4, 5, 6, and 7.