Filter
Top Products
®
Appendix D
QUANTUM
73
The Reset Program procedure causes the QUANTUM to reload the current saved program.
Reset Device (21h)
SYS_HEAD, 21(h), F7(h)
The Reset Device procedure causes the QUANTUM to reboot the software as if the power had been turned off, and
then back on. If edits have been made to the current program without saving, they will be lost.
SYSEX Setup Dump Sample
Following is a simple example of a SYSEX Setup dump. It takes you set by step through all of the operation com-
mands of a typical SYSEX procedure.
<<SYSEX Header>>
F0 00 01 1E 00 01
<<Procedure>>
43
<<Setup Dump Version>>
00 01 00 01
<<Setup Type and Setup Number>>
00 00 00 00
<<Setup Transmit Count...Lo Bytes, Hi Bytes>>
00 0A 00 06
<<12 Character Setup Name...dynamic>>
00 31 00 3A 00 52 00 76 00 62 00 20 00 32 00 3A 00 47 00 74 00 52 00 76
<<Null to indicate end of Character String>>
00 00
<<Misc Setup Data...too dynamic to document>>
00 07 00 00 00 06 00 00 00 03 00 06 00 03 00 32 00 08 00 03 00 00 00 00 00 02 00 04 00 00 00 00 00 02 00 08 00
00 00 00 01 7E 00 00 00 00 00 20 01 7F 00 00 00 00 00 20 00 00 00 00 00 00 00 20 00 01 00 00 00 00 00 20 00 02
00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<<SYSEX End>>
F7
SYSEX Definitions
QUANTUM User Manual