Filter
Top Products
5
ENGLISH
1
MAIN FEATURES
1. 2-Channel DJ Mixer
4 LINE, 2 PHONO, 1 Microphone systems and 2
MASTER outputs are provided independently.
2. VCA controlled Channel Fader and Crossfader
3.
Channel Fader and Crossfader contour adjustable
This feature allows adjusting the “shape” of the
Crossfader and Channel fader response from a
gentle curve for smooth to the steep pitch
required for top performance cut and scratch
effects.
4. Channel Fader and Crossfader Reverse
5. Channel Fader and Crossfader Start
The CD player can be started or stopped simply by
increasing or decreasing the level of the Ch.fader
or by using the Crossfader left to right or right to
left. (This function can only be used when the
DENON CD players DN-S3000, DN-S5000, DN-
S1000 or etc. is connected to the DN-X100.)
6. Channel Reverse function
This function allows the left hand channel fader or
right hand channel fader to control PGM1 or
PGM2.
7. 3-Band Equalizer/Gain
LOW, MID, HI and GAIN controls are available on
every input channel.
8. 4 direction placement for input selector
9. Microphone Talkover function
2
PART NAMES AND FUNCTIONS
(Refer to page 3.)
(1) Top panel
q MIC ON/OFF/TALKOVER switch
• When TALKOVER is selected , all signals except
the microphone level are decreased by 20 dB.
When at the ON or OFF position all signals
remain at their standard levels.
w MIC EQ controls
• Contour the frequency response of the Mic
input –12 dB to +12 dB.
• At the center position, sound is flat.
e MIC LEVEL control
• Adjust the level of Mic signal.
r Source EQ controls
• Contour the frequency response of the selected
inputs.
HI and MID:
• Adjusts the high-tone and mid-tone sound –40
dB to +10 dB.
LOW:
• Adjusts the high-tone and mid-tone sound –40
dB to +6 dB.
NOTE:
Clipping may occur if adjustments are set to
harsh.
t Input select switch
• Switches between the PHONO/LINE and LINE
inputs.
• When the lever of switch is vertical position, the
LINE2 or LINE4 input is selected.
• When the lever of switch is slope, the
PHONO1/LINE1 or PHONO2/lINE3 input is
selected.
• You can perform 4 direction placement. See
page 10.
y CUE buttons
• These buttons are used to activates a channels
“CUE” mode, the LED above the cue button
will glow when cue mode is activated. Cue
mode will send a channels incoming signal to
the headphones.
u GAIN
• Adjusts the gain of each input channel.
i MASTER LEVEL control
• Adjust the level of the MASTER output.
o MASTER BALANCE control
• Adjust the L/R balance of the MASTER outputs.
!0 Headphone PAN control
• This function allows you to monitor the CUE
level as well as the MASTER output in your
headphones. A CUE Level may only be
monitored of the CUE signal is selected.
• Serves two purposes…In the STEREO mode it
changes the relative levels of the CUE and
MASTER mixed together in both ear cups. In
the SPLIT CUE mode it changes the balance
between the monaural CUE sound in the left
and monaural MASTER sound in the right.
!1 PHONES LEVEL control
• Adjusts the headphone output level.
!2 SPLIT CUE button
• In the STEREO mode, the stereo sound of
MASTER and CUE are fed to both ear cups. In
the SPLIT CUE mode, the headphone circuit
provides monaural CUE sound to the left and
monaural MASTER sound to the right.
• When the Level Meter mode select switch is
set to “MASTER”…In the STEREO mode, the
meter indicates the stereo level in the L/R
Master output. In the SPLIT CUE mode, the
monaural CUE sound level is displayed on the
left and the monaural MASTER sound level is
displayed on the right.
• In the SPRIT CUE mode, the LED is lit.
!3 Channel Fader
• Controls the channel output level.
– TABLE OF CONTENTS –
z
MAIN FEATURES ...............................................5
x
PART NAMES AND FUNCTIONS...................5, 6
c
CONNECTIONS..................................................7
v
SPECIFICATIONS................................................8
b
FADER START ....................................................9
n
ROTATING INPUT SELECT SWITCHES ...........10
2 ACCESSORIES
Please check to make sure the following items
are included with the main unit in the carton:
2 INTRODUCTION
Thank you very much for purchasing the DENON DN-X100 DJ MIXER.
DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s
non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are
certain to provide you with many hours of outstanding listening pleasure.
q Operating instructions.......................................1
w AC adaptor........................................................1
(AA-26 : for AC 120 V, AA-27 : for AC 230 V)