Filter
Top Products
ENGLISH
5
FADER START
If the separately sold DN-S3500, DN-D4500 and etc. players are connected to LINE2, 4, 6 or 8, they can be started using the source
input fader (Ch. Fader) or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.
LINE 2 LINE 4 LINE 6 LINE 8
FADER
LINE 2
FADER
LINE 4
FADER
LINE 6
FADER
LINE 8
DN-X500/X900
MAIN ALPHA
FADER
MAIN
FADER
ALPHA
DN-S3500
DN-D4500
CD1
MAIN ALPHA
FADER
MAIN
FADER
ALPHA
DN-S3500
DN-D4500
CD2
RCA cord
3.5 mm stereo mini cord
Channel Fader Start
Turn the INPUT ASSIGN switch
!2 to select the desired source
from LINE2, 4, 6 or 8.
1
2
Crossfader Start
Turn on the CH FADER START switch
#2. (CROSS FADER ASSIGN position is
POST)
3
Move the source input fader (Ch.
Fader) !3 of CH-1, CH-2, CH-3 or
CH-4 control all the way to the
bottom.
4
Set the standby mode on CD player.
5
When you want to start the player,
move up the source input fader
(Ch. Fader) !3 and the CD player
will begin playing.
Turn the INPUT ASSIGN switch
!2 to select the desired source
from LINE2, 4, 6 or 8.
1
2
Using the CROSSFADER ASSIGN
switch @7, assign the channel or
Sampler source into A or B of
Crossfader.
3
Turn on the CROSSFADER START A, B switches #1.
5
Set the standby mode on CD player.
6
Use the CROSSFADER CONTOUR control @9 to
control the cross fader startup curve.
4
Slide the Crossfader @8 all the way in direction
opposite the source you want to start. (In the following
example, startup is done with the CD player connected
set to Assign A.)
7
When the Crossfader @8 is slid in the opposite
direction, CD player play will begin.
ENGLISH
5
ENGLISH