Filter
Top Products
ENGLISH
9
SPECIFICATIONS
■ GENERAL
Dimensions: 482 (W) x 112.5 (H) x 177 (D) mm (without feet)
Installation: 19-inch rack mountable 4U
Mass: 5.8 kg
Power supply: 120 V AC ±10%, 60 Hz (U.S.A. and Canada models)
230 V AC ±10%, 50 Hz (European models)
Power consumption: 27 W
Environmental conditions: Operational temperature: 5 to 35°C (41 to 95°F)
Operational humidity: 25 to 85% (no condensation)
Storage temperature: –20 to 60°C (4 to 140°F)
■ AUDIO SECTION
Input Sensitivity & Impedance:
Main Mic –54 dBV (2.0 mV) 1 kΩ/kohms
Aux Mic –60 dBV (1.0 mV) 1 kΩ/kohms
Effect (Return) –14 dBV (200 mV) 50 kΩ/kohms
2-Phono –50 dBV (3.0 mV) 50 kΩ/kohms
8-Line –14 dBV (200 mV) 50 kΩ/kohms
Output level & Impedance:
Main (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Main (Unbalanced) 0 dBV (1.0V) 1 kΩ/kohms
Booth(Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Rec (RCA) –10 dBV (316 mV) 1 kΩ/kohms
Effect (Send) –14 dBV (200 mV) 1 kΩ/kohms
Subwoofer 2 dB (0.975 V) 600 Ω/ohms
Headphone 0 dB (1.0 V) 32 Ω/ohms (33 Ω/ohms load)
Frequency Response:
Line 20 to 20 kHz ±2 dB
Phono 20 to 20 kHz RIAA ±2 dB
Mic 20 to 20 kHz ±2 dB
Signal to Noise ratio:
Line 82 dB 0 dBm, 1 kHz, EQ flat
Phono 75 dB 0 dBm, 1 kHz, EQ flat
Main Mic 65 dB 0 dBm, 1 kHz, EQ flat
Total harmonic distortion rate:
Line Below 0.05%
Phono Below 0.05%
Cross talk: Over 70 dB
Channel equalizer:
Hi +10 dB, –35 dB (16 kHz)
Mid +10 dB, –35 dB (1 kHz)
Low +6 dB, –35 dB (60 Hz)
Microphone equalizer:
Hi +12 dB, –12 dB (10 kHz)
Mid +12 dB, –12 dB (1 kHz)
Low +12 dB, –12 dB (100 Hz)
✽ Specifications and design are subject to change without notice for purpose of improvement.
■ GENERAL
Dimensions: 482 (W) x 112.5 (H) x 177 (D) mm (without feet)
Installation: 19-inch rack mountable 4U
Mass: 5.9 kg
Power supply: 120 V AC ±10%, 60 Hz (U.S.A. and Canada models)
230 V AC ±10%, 50 Hz (European models)
Power consumption: 33 W
Environmental conditions: Operational temperature: 5 to 35°C (41 to 95°F)
Operational humidity: 25 to 85% (no condensation)
Storage temperature: –20 to 60°C (4 to 140°F)
■ AUDIO SECTION
Input Sensitivity & Impedance:
Main Mic –54 dBV (2.0 mV) 10 kΩ/kohms
Aux Mic –60 dBV (1.0 mV) 10 kΩ/kohms
Effect (Return) –14 dBV (200 mV) 50 kΩ/kohms
3-Phono –50 dBV (3.0 mV) 50 kΩ/kohms
8-Line –14 dBV (200 mV) 50 kΩ/kohms
Output level & Impedance:
Main (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Main (Unbalanced) 0 dBV (1.0 V) 1 kΩ/kohms
Zone (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Booth(Balanced) 4 dBm (1.23 V) 600 Ω/ohms
Rec (RCA) –10 dBV (316 mV) 1 kΩ/kohms
Effect (Send) –14 dBV (200 mV) 1 kΩ/kohms
Subwoofer/Lighting(Balanced) 2 dBm (0.975 V) 600 Ω/ohms
Headphone 0 dBV (1.0 V) 32 Ω /ohms (33 Ω/ohms load)
Frequency Response:
Line 20 to 20 kHz ±2 dB
Phono 20 to 20 kHz RIAA ±2 dB
Mic 20 to 20 kHz ±2 dB
Signal to Noise ratio:
Line 82 dB 0 dBm, 1 kHz, EQ flat
Phono 75 dB 0 dBm, 1 kHz, EQ flat
Main Mic 65 dB 0 dBm, 1 kHz, EQ flat
Total harmonic distortion rate:
Line Below 0.05%
Phono Below 0.05%
Cross talk: Over 70 dB
Channel equalizer:
Hi +10 dB, –35 dB (16 kHz)
Mid +10 dB, –35 dB (1 kHz)
Low +6 dB, –35 dB (60 Hz)
Microphone equalizer:
Hi +12 dB, –12 dB (10 kHz)
Mid +12 dB, –12 dB (1 kHz)
Low +12 dB, –12 dB (100 Hz)
Only DN-X900
Digital input:
Input sensitivity –26 dB FS
Signal format SPDIF (IEC60958 Type
III 32 kHz ~ 48 kHz 24 bit) (COAXIAL)
Digital output:
Signal format IEC60958 Type
II (OPTICAL, COAXIAL)
Output level 0.5 Vp-p 75 Ω/ohms (COAXIAL)
✽ Specifications and design are subject to change without notice for purpose of improvement.
DN-X900DN-X500
7
ENGLISH