Filter
Top Products
b
GT-PRO
Guitar Effects
Processor
TurboStart
TBS230 ©2005 Roland Corporation U.S.
www.RolandUS.com
Page 2
Saving a Patch (Patch Write)
Once you’ve edited a patch, you must write it to one
of the 200 user locations to save your work. Follow
these steps to write a patch:
1. When you’re finished editing a patch, press the
WRITE button.
2. Turn the PATCH/VALUE dial to select a user
location from 1/1 to 20/10.
3. Press the WRITE button again.
The FX Chain (Effects Chain)
Changing the order of effects is done within the “FX
Chain” of the GT-PRO. Positioning an effect before or
after another can significantly change the character
of a patch. Use the following steps to move an effect
within the FX Chain:
1. Press the NAME/FX CHAIN button until “Effect
Chain” appears.
2. Press PARAMETER to place the stick-
figure cursor at the location to which you want to
move the effect.
3. Once you’ve chosen the desired position, press
the button belonging to the effect you want to
move.
4. Repeat Steps 2-3 for any other effects you’d like
to re-position.
5. When you’re finished, press EXIT to return to the
main (play) menu. If you want to save the
changes you’ve made, follow the steps in
“Saving a Patch” above.