Filter
Top Products
6
nect the cable from the Input 1 (Mono) jack when not in use. If the
optional Harman PS200R power supply is used, cables can remain
connected.
Input 2 - Connect a second input to this jack for stereo operation.
Input 1 and 2 are processed separately through the stereo delay
effect and then fed to Outputs 1 and 2 to keep true stereo separa-
tion between channels.
Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 16 for informa-
tion on accessing and changing the battery. See page 12 for more
information on using and changing the Tails Switch settings.
Indicator LED - Lights when the effect is turned on. When bat-
tery power is low (approximately 15 minutes before it dies), the
Indicator LED begins to dim giving you advanced warning that very
shortly you will need to replace the battery.
7.
8.
9.