Filter
Top Products
12
Tails Switch
The HardWire Delay/Looper features a switch that allows the delay repeats
to continue being heard after the effect is bypassed. When the Tails Switch is
set ON, the HardWire Delay/Looper does not utilize true hardwire bypass.
If you always want to use true hardwire bypass, set the Tails Switch to OFF.
When the Tails Switch is OFF, delay repeats are cut off immediately when the
effect is bypassed.
The Tails Switch is located under the pedal Foot Switch and is accessed by
pressing in one of the Foot Switch Release Pins using the tip of a 1/4" guitar
cable plug. Once the Foot Switch is removed, the switch is visible inside the
chassis next to the button that turns the effect on and off. Slide the switch to
the left to turn Tails ON and to the right to turn Tails OFF.