Filter
Top Products
3. Using the internal power amplifier for monitoring or side-fill purposes:
In case you want to use an external power amplifier to drive your main speaker systems, the internal power amplifier can be used for monitoring
or side-fill purposes. Use short patch-cables to connect the AUX3 OUTPUT with the EQ INPUT L and the MONO OUTPUT with the EQ
INPUT R. This enables you to use the internal graphic equalizer to separately adjust the signals of the monitor and the side-fill output channels.
The volume of the main channels can still be controlled via the master faders. The monitor speakers’ volume is determined by the setting of
the AUX3 fader while the MONO-fader controls the volume of the side-fill channel.
4. Monaural sound reinforcement with monitoring:
If your application does not demand stereo audio, you can operate the PSX in mono. In that case you can use short patch-cables to connect
the MONO OUTPUT with the EQ INPUT R and the AUX3 OUTPUT with the EQ INPUT L. The right main output is used for the sound
reinforcement while the left main output carries the monitor signal.
MASTER PATCHBAY AND INSTALLATION ALTERNATIVES
24 of 32