Filter
Top Products
(3)
4. On the rear panel are 3 stereo PHONO/LINE (29, 32, 35)
inputs and 4 stereo LINE (28, 31, 34, 37) inputs. The
PHONO/LINE SWITCH (30) enables you to set the (29)
input to Phono or Line. The PHONO/LINE SWITCH (33)
enables you to set the (32) input to Phono or Line. The
PHONO/LINE SWITCH (36) enables you to set the (35)
input to Phono or Line. The phono inputs will accept only
turntables with a magnetic cartridge. A GROUND SCREW
(38) for you to ground your turntables is located on the rear
panel. The stereo line inputs will accept any line level input
such as a CD player, a cassette player, etc.
5. Headphones can be plugged into the front panel mounted
HEADPHONE (5) jack.
OPERATION:
1. POWER ON: Once you have made all the equipment
connections to your mixer, press the POWER SWITCH (2).
The power will turn on and the POWER LEDS (17) will glow.
2. CHANNEL 1: SWITCH # (8) allows you to select the
PHONO 1/LINE 2 (35) or the LINE 1 (37) input. The
CHANNEL SLIDE (9) controls the input level of this
channel.
3. CHANNEL 2: SWITCH # (10) allows you to select the PHONO
2/LINE 4 (32) or the LINE 3 (34) input. The CHANNEL
SLIDE (11) controls the input level of this channel.
4. CHANNEL 3: SWITCH # (12) allows you to select the PHONO
3/LINE 6 (29) or the LINE 5 (31) input. The CHANNEL
SLIDE (13) controls the input level of this channel.
5. CHANNEL 4: SWITCH # (14) allows you to select the LINE 7
(28) or the MIC 2 (4) input. The CHANNEL SLIDE (15)
controls the input level of this channel.
6. CROSSFADER SECTION: The CROSSFADER (26) allows
the mixing of one source into another. The left side of the
CROSSFADER (26) is CHANNEL 1 and the right side is
CHANNEL 2. The CROSSFADER (26) in your unit is
removable and if the need arises can be easily replaced.
Your Gemini mixer comes with an RG-45 PRO
(RAILGLIDE™) Dual-Rail Crossfader. RAIL GLIDE™
crossfaders have internal dual stainless steel rails that
allow the slider to ride smoothly and accurately from end
to end. Also available is our CF-45 PRO (PROGLIDE™)
Dual-Rail Crossfader. This unique crossfader features,
state of the art conductive plastic technology, for unlimited
useage. Another crossfader we have available is the PSF-
45 (PRO SCRATCH™) crossfader with a special curve
designed for scratch mixing. Just purchase one from your
Gemini dealer and follow the instructions:
INTRODUCTION:
Congratulations on purchasing the Gemini PMX-1100
mixer. This state-of-the-art mixer is backed by a three year
warranty, excluding crossfader and channel slides. Prior to
use, we suggest that you carefully read all the instructions.
FEATURES:
• 4 Stereo Channels
• State of the Art Cue Section
• 3 Phono/Line Convertible, 4 Line, and 2 Mic Inputs
• Talkover
• Master and Record outputs
• Master Treble and Bass Controls
CAUTIONS:
1. All operating instructions should be read before using this
equipment.
2. To reduce the risk of electrical shock, do not open the unit.
There are NO USER REPLACEABLE PARTS INSIDE.
Please refer servicing to a qualified service technician.
In the U.S.A., if you have any problems with this unit,
call 1-732-969-9000 for customer service. Do not return
equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat
source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid
solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its
original carton and packaging. This will reduce the risk of
damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT
ON ANY CONTROLS OR SWITCHES.
CONNECTIONS:
1. Before plugging in the 15V AC Adapter (1), make sure that the
POWER (2) switch is in the off position. The POWER LEDS (17)
will be off.
2. The PMX-1100 is supplied with 2 sets of output jacks. The
MASTER OUTPUT (26) jacks are unbalanced and used to
connect to your main amplifier. The REC OUTPUT (27)
jacks can be used to connect the mixer to the record input of
your recorder enabling you to record your mix.
3. The MIC 1 (3) input (found on the front panel) accepts a
XLR connector. The MIC 2 (4) input (found on the rear
panel) accepts 1/4" connectors. All accept balanced
and unbalanced microphones.