Filter
Top Products
-8-
H3122 Classical Guitar Kit
To attach the fingerboard to the neck:
1. Using a straightedge, make sure the neck
and body surface are flush.
2. Using rubber bands and small sticks of
wood, secure the fingerboard to the neck
with a thin, even layer of wood glue (
Figure
5). Note—Make sure the fingerboard is cen-
tered across the width of the neck and that
the 12th fret is centered over the neck to
body joint.
3. After the fingerboard has thoroughly dried,
use a file or sandpaper to make the edge of
the neck flush with the edge of the finger
-
board.
Figure 5. Securing the fingerboard to the neck.
Fingerboard to Neck