Filter
Top Products
-6-
H3124 Banjo Kit
Like the wooden rim, the banjo neck has been
rough sanded at the factory. Personalize the fret-
board and neck headstock with additional cutting,
inlay, or design work before final sanding. Note—
Take your time and consider testing your designs
in scrap wood before performing the work on the
actual fretboard and headstock.
To sand the banjo neck:
1. Wear an ANSI-approved respirator and
safety glasses when sanding wood!
2. Perform any custom cutting, inlay, or design
work to the neck headstock.
3. Using the sanding technique described in the
previous sub-section, sand the entire banjo
neck, EXCEPT for the frets and fretboard.
Note—Sanding the fretboard and frets will
affect the playability of the banjo, and could
lead to unrepairable damage.
The fingerboard requires no sanding. Note—
Sanding the fingerboard will affect the playability
of the banjo, and could lead to unrepairable dam-
age.
Bridge
The bridge has been rough sanded at the factory.
Final sand the bridge as described in the
Wooden Rim sub-section.
FingerboardNeck